Running Cyclos Cluster on Jelastic PaaS

Cyclos is a complete on-line banking system with additional modules such as e-commerce and communication tools. With dynamic structure of Cyclos you can ‘build’ a dedicated payment system from scratch just by changing the configuration.

Recently Cyclos released a new fourth version and Jelastic provided the ability to install it in one click. This can be done via Cyclos site (you need to register first) or via JPS widget in our Cyclos 4 document.

In Jelastic you can run Cyclos on Tomcat, Jetty and Glassfish. The database for Cyclos 4 is the open source database PostgreSQL (not less than 9.3). The minimal memory space requirements to run a single Cyclos instance is 500 MB (so you need to use at least 4 cloudlets).

In this tutorial we’ll find out how to configure highly reliable and scalable Cyclos cluster with master-slave database replication and High Availability enabled within Jelastic Cloud hosting.

cyclos cluster scheme

The high availability helps to prevent failed transactions and other troubles that can influence your users. Extending the application across a number of the servers provides redundancy. The redundancy ensures that if one of the servers fails, the users from that node will be automatically switched to the other instance of this Tomcat cluster. Thanks to the replication, the other instance already has all the sessions of the failed node, so end-users never notice any change.

In addition, the PostgreSQL database master-slave replication improves the performance and the fail-over capabilities of your environment.

Jelastic Environment Creation

Firstly, you need to prepare a basis for our application cluster - environment with all required containers.

1. Log into your Jelastic account.

2. Click Create environment and select:

  • Tomcat 7 as your application server
  • PostgreSQL 9.3 as the database you want to use
Note: You need to use the version of PostgreSQL not less than 9.3.

cyclos cluster cyclos environment

Then enter your environment name, for example, cyclos, and click Create.

3. It will take just a minute for your environment to be created. cyclos cluster environment listed

Cyclos Deployment

Now we are ready to deploy Cyclos application.

1. To download Cyclos package navigate to the Cyclos web site and register if you haven’t done this before.

cyclos cluster download button

cyclos cluster register at cyclos

2. Confirm your account creation via received email.
Sign in with your credentials and download the installation package.

Note: You can also use Jelastic one-click install button in order to get Cyclos automatically installed. It is recommended to install Cyclos manually if you want to set a clustered solution.

cyclos cluster cyclos

3. Extract the files from .zip package you have just downloaded.

cyclos cluster web

4. Create a .WAR file from web folder content (cyclos-4.0.1/web/).
Just put the content of the web folder to another zip archive file, for example, and rename it to cyclos_4.war or any other name with the .war extension.

5. Upload your Cyclos war package to the Deployment manager.

cyclos cluster upload war file

6. Once the package is in Jelastic, deploy it to the environment you have just created.

cyclos cluster deploy cyclos

Configure Database Replication

When Cyclos application is deployed you can proceed to database settings. So let’s configure PostgreSQL master-slave replication in order to protect your application from downtime or data loss.

PostgreSQL in your environment with Cyclos deployed will be used as master database. For slave database you need to create a separate environment.

Navigate to Jelastic dashboard and create environment with PostgreSQL node which is going to be used as slave database. Name your environment (e.g. cyclos-slave) and click Create.

cyclos cluster postgresql environment

Master DB Configs

1. Find the environment with the master database in your environment list (with deployed Cyclos in our case). Click the Config button next to the PostgreSQL node.

2. Open conf > postgresql.conf file. Uncomment and change the following settings for enabling streaming replication:

wal_level = hot_standby
max_wal_senders = 3  
archive_mode = on  
archive_command = 'cp %p /tmp/%f'

cyclos cluster master postgresql conf

3. Open the pg_hba.conf configuration file, which is located in the same conf folder.

4. Permit the standby database cluster connection by stating the following parameters:

host replication all {standby_ip_address}/32 trust
Note: You need to add one more spare line after the added settings.

cyclos cluster master pg hba

Don’t forget to Save the changes you’ve performed.

5. Now you should access your environment with master DB via SSH and enter the PostgreSQL container it contains.

In the case you haven’t done the similar operations before, you need to:

cyclos cluster cyclos env via ssh

6. Once you’ve entered the container, you need to stop it, delete the old WAL log file, and create a new empty one:

sudo service postgresql stop  
/usr/pgsql-9.3/bin/pg_resetxlog -f /var/lib/pgsql/data/

7. Finally, start the container with the following command:

sudo service postgresql start

cyclos cluster config master via ssh

Slave DB Configs

1. Access the environment with standby database (named cyclos-slave in our case) via SSH in the same way you did it for the master one:

cyclos cluster cyclos slave ssh

2. Just after you’ve entered the DB container you need to stop it and remove the old database with the following commands:

sudo service postgresql stop  
rm -rf /var/lib/pgsql/data/

3. Then copy a new database from the master server:

pg_basebackup -U webadmin -R -D /var/lib/pgsql/data/ --host={master_IP_address} --port=5432
Note: You should substitute the {master_IP_address} value with the IP address of your master PostgreSQL server, located in the environment with Cyclos app deployed.

cyclos cluster config slave via ssh

4. To complete the configuration of standby PostgreSQL database switch back to your Jelastic dashboard and click Config icon next to it.

5. In the conf folder locate the postgresql.conf file, uncomment the hot_standby = off parameter in the Standby Servers section, and change its value to on.

cyclos cluster enable hot standby slave

Save the changes you’ve performed.

6. Finally, switch to your SSH console and run the container with slave DB:

sudo service postgresql start

cyclos cluster start slave container

After both of your databases are configured, log in to the admin panel of the master database (one in the cyclos environment) and create a new database:

  • center the DB name (e.g. cyclos4)
  • choose template0 and UTF8 encoding from the drop-down lists
  • click Create

cyclos cluster master cyclos db

As a result you’ll get a newly created database which will be replicated to the slave base also.

Note: As we’ve copied all the data and configurations from the master PG server to the slave PG server, credentials for admin access to the slave database became the same as to the master’s one.

cyclos cluster master db

Navigate to the PostgreSQL Replication document to get more details on how to check if the database is replicated to the standby db.

Configure Cyclos

Now we need to make final configurations of Cyclos application and then to complete full clustering settings by switching on High Availability.

1. Open Jelastic dashboard and click Config button for Tomcat.

tomcat config.png

2. Navigate to webapps/ROOT/WEB-INF/classes folder and create file.

3. Copy the content of file in classfolder and paste it to the newly created file.

4. In the opened file, specify your master PostgreSQL data:

  • in cyclos.datasource.jdbcUrl parameter state the host together with the name of database created while DB configuration:
  • database credentials you’ve received via email

cyclos cluster server conf

Save the applied changes and RestartTomcat.

5. Finally, let’s configure the cluster itself. Press Change environment topology button next to your Cyclos environment.

cyclos cluster change topology

In the opened wizard enable High Availability. Set up the amount of resources for automatically added NGINX-balancer node (it will handle and distribute all the requests in front of your cluster).

cyclos cluster HA

6. Click Open in Browser and proceed to work.

cyclos cluster open

Note: The first Cyclos opening can take a few minutes, please be patient.

After opening you need to go through several steps of Cyclos configuration wizard using credentials you’ve registered at the Cyclos site before.

cyclos cluster cyclos credentials

That’s all. Now you have your own highly-reliable Cyclos cluster in the cloud. This cluster ensures that no server is a single point of failure, and the cloud ensures that one server failure doesn’t overload the rest of the servers.

What’s next?