Support

Virtuozzo Infrastructure Platform

Virtuozzo Infrastructure Platform Overview

Virtuozzo Infrastructure Platform is a hyperconverged infrastructure that includes compute, storage, virtual networking, and management for multiple workloads.
 

Requirements for Installation

A typical Virtuozzo Infrastructure Platform installation recommended for production consists of a single management node and at least four nodes for storage and compute. The following table lists the minimal hardware requirements for the management node and storage/compute nodes. The recommended configurations are provided in the Installation Guide.

TypeManagement nodeEach storage and compute node
CPU

64-bit x86 processors with AMD-V or Intel VT hardware virtualization extensions enabled.

16 logical CPUs*

64-bit x86 processors with AMD-V or Intel VT hardware virtualization extensions enabled.

8 logical CPUs*

RAM

32 GB**

8 GB**

Storage

 

1 disk: system + metadata, 100+ GB SATA HDD

1 disk: storage, SATA HDD, size as required

1 disk: system, 100+ GB SATA HDD

1 disk: metadata, 100+ GB SATA HDD (only on the first three nodes in the cluster)

1 disk: storage, SATA HDD, size as required

Network

1 GbE for storage traffic

1 GbE (VLAN tagged) for other traffic

1 GbE for storage traffic

1 GbE (VLAN tagged) for other traffic


Table 1.2.1 Node hardware requirements

* A logical CPU is a core (thread) in a multicore (multithreading) processor.
** Each CS, e.g., storage disk, requires 1 GB of RAM (0.5 GB anonymous memory + 0.5 GB page cache). The total page cache limit is 12 GB. In addition, each MDS requires 0.2 GB of RAM + 0.1 GB per 100TB of physical storage space.